25
Advice and recommendations for use
1) Place the filter (18) in the filter-holder unit for ground coffee (16) to pour one cup of coffee.
Place the filter (19) in the filter-holder unit for ground coffee (16) to pour two cups of coffee.
2) Make sure that the thermometer hand is in position of the coffee cup symbol.
3) Take the filter-holder unit for ground coffee (16) insert the filter (18) for one coffee or the filter (19)
for two coffees, according to requirements.
3) Pour the ground coffee with the appropriate measure (23): one measure for one coffee or two measures
for two coffees, according to the chosen filter.
4) Level the coffee powder inside the filter with the appropriate pressing tool.
5) Insert the filter-holder unit (16) into the seat of the brewing unit (9) and fix it by rotating the handle
to the right to about the centre of the machine (handle must be rotated until correct pressure for a seal
during delivery is reached).
6) Take one or two dry and warm coffee cups from the cup-warming surface and place them under the
spout of the filter holder.
7) Press the button (4) to start delivery of the coffee.
8) Then press the button (4) again to stop delivery of the coffee: you can decide what type of coffee to
enjoy: “ristretto”, “espresso”, “lungo” or ...
9) Serve the coffee immediately to fully enjoy its aroma.
10) Remove the filter-holder unit (16) from the brewing unit (9) by turning the handle to the left.
11) Remove the coffee powder and place it in the litter bin.
12) The machine is ready to make a new coffee.
11
9