Buhler 2895 - Page 5

bühler
Allied Front-End Loader
- 3 - P4110
2895 2895
Item Description
REG TSL
2895S
REG
2895S
TSL
A Maximum lift height to pivot pin [in/cm] 181/460 181/460 169/429 169/429
B Maximum lift height under level bucket [in/cm] 171/434 171/434 159/403 159/403
C Clearance with bucket dumped [in/cm] 146/370 146/370 134/340 134/340
D Reach at maximum lift height [in/cm] 29/74 29/74 20/51 20/51
E Maximum dump angle [deg] 62 61 62 61
G Maximum rollback angle [deg] 35 35 34 34
H Digging depth [in/cm] 5.0/12.7 5.0/12.7 5.0/12.7 5.0/12.7
J Overall height in carry position [in/cm] 101/255 103/262 101/255 103/262
U Lift capacity to maximum height - at pivot pin [lb/kg] 7000/3175 6900/3129 6900/3129 6875/3118
optional cylinder
V Lift capacity to maximum height [lb/kg] 4950/2245 4950/2245 4925/2234 4925/2234
optional cylinder
W Lift capacity to 59 in. height - at pivot pin [lb/kg] 7650/3470 7650/3470 8375/3798 8400/3800
optional cylinder
X Lift capacity to 59 in. height [lb/kg] 6125/2778 6125/2778 6600/2993 6600/2993
optional cylinder
Y Breakout force - at pivot pin [lbf/daN] 8475/3770 8500/3781 9950/4426 9950/4426
optional cylinder
Z Breakout force [lbf/daN] 6550/2914 6550/2914 7450/3314 7475/3325
optional cylinder
VV Bucket rollback force at maximum height [lbf/daN] 6250/2780 6375/2836 6300/2802 6400/2847
optional cylinder
XX Bucket rollback force at 59 in. lift height [lbf/daN] 8000/3559 7850/3492 8000/3559 7875/3503
optional cylinder
ZZ Bucket rollback force at ground line [lbf/daN] 7400/3292 7025/3125 7400/3292 7000/3114
optional cylinder
Raising/Lowering time [sec] 8.1/5.5 8.1/5.5 8.1/5.5 8.1/5.5
optional cylinder
Bucket dumping/rollback time [sec] 4.0/2.6 4.0/2.6 4.0/2.6 4.0/2.6
optional cylinder
Lift cylinder tube/shaft size [in] 3.5/2.0 3.5/2.0 3.5/2.0 3.5/2.0
optional cylinder
Lift cylinder stroke/retracted length [in] 32.50/52.50 32.50/52.50 32.50/62.50 32.50/62.50
Bucket cylinder tube/shaft size [in] 3.00/1.75 3.00/1.75 3.00/1.75 3.00/1.75
optional cylinder
Bucket cylinder stroke/retracted length [in] 27.50/38.75 24.50/52.25 27.50/38.75 24.50/52.25
Mounting Height (+/- 3.0) [in] 55
Hydraulic pressure rating/flow rate [psi]/[gpm] 2500/20
Tractor size [H.P. @ normal duty] 130-275
Bucket size [in/cu.ft.] 72/27.0
- * Indicates bucket size used for calculations
84/30.5*
of lift capacities and rollback forces.
96/37.3
Weight (with bkt & mtg kit) [lb/kg] 3800/1270
NOTE: Specifications are subject to change without notice or obligation.