What to do if lights do not function on Buhler Farm King 1684 Tools?
If the lights on your Buhler Tools aren't working, start by checking the electrical connection at the tractor. Also, check for broken wires and the tractor light circuit.
Why is the grain flow too slow in Buhler Tools?
If the grain flow is too slow in your Buhler Tools, open the gate(s) to allow a faster grain flow to the hopper intake auger. It may also be caused by the tractor RPM set too low; raise the tractor RPM to the proper setting.
Covers owner's information, serial number location, manual storage, and equipment identification.
Specific component locations for models 1684, 16104, and 16124.
Operator responsibility, qualifications, rules, operation, transport, maintenance, PTO, and machine capabilities.
Measures for preventing fires related to maintenance, operation, electrical, fueling, welding, and extinguishers.
Explains safe operating zones, safety zone identification, and safety signs/decals.
Provides a form for personnel to sign off on safety training and understanding.
Covers component unloading and identification for assembly.
Details assembly of undercarriage, tube, and bridging for models 1684, 16104, & 16124.
Covers installation and routing of hydraulic hoses and components for cylinders and valves.
Details installation of work lights, amber lights, and light switch box.
Covers pre-operation checks, break-in, tractor requirements, and initial setup.
Details connecting the auger to the tractor, hitch, and PTO driveline.
Covers hopper mover, winch, flow control, auger placement, and unloading.
Outlines requirements, guidelines, and procedures for safely transporting the auger.
Provides a chart to diagnose and resolve common auger problems.
Outlines recommended maintenance intervals for daily, weekly, semi-annually, and annually.
Details lubrication recommendations, locations, and procedures for various auger components.
Covers tire/wheel replacement, lug nut torque, and bridging cable checks.
Procedure for installing safety signs and guidelines for storing the auger.
Overview of parts identification, including component location for the 16" Backsaver Auger.
Detailed parts breakdown and diagrams for the input box assembly (models 1684, 16104, 16124).
Parts identification and diagrams for the undercarriage assembly (models 1684, 16104, 16124).
Parts identification and diagrams for the bridging assembly (models 1684, 16104, 16124).
Parts identification and diagrams for the lift arm assemblies (models 1684, 16104, 16124).
Parts identification and diagrams for various tube assemblies (models 1684, 16104, 16124).
Parts identification and diagrams for the intake auger (models 1684, 16104, 16124).
Parts identification for hopper assemblies (models 1684, 16104, 16124).
Parts identification for hydraulic kits, including cylinders and hoses.
Parts identification for the light kit and related components.
Parts identification for M2000 Helical Gearbox and 4168 Gearboxes.
Electrical diagrams for models 1684, 16104, and 16124.
Detailed dimensions and performance specifications for models 1684, 16104, and 16124.
Torque specifications for metric and imperial hardware for assembly.
Details on O-ring and flare fittings, tubes, and hoses for hydraulic systems.
Covers base warranty, repair parts warranty, exclusions, and dealer/labor costs.
Outlines warranty registration, requirements, and limitations of liability.
To Next Page
General