To Next PageTo Next Page
Need help?Do you have a question about the Buhler Farm king FK302 and is the answer not in the manual?
Procedures and requirements for submitting warranty claims.
Guidelines for authorized labor and reimbursement under warranty.
Defines directions (left, right, front, rear) as viewed from the operator's seat.
Essential safety precautions applicable to all operations.
Critical safety measures to follow during equipment operation.
Safety protocols for performing maintenance and repairs.
Safety guidelines for transporting the tiller.
Recommendations for safely storing the equipment.
Information on identifying, maintaining, and applying safety signs.
Illustrates the placement of various safety signs on the machine.
Details the 'Caution' safety sign and its operational instructions.
Details the 'Warning' safety sign for hazards like rotating drivelines.
Details the 'Warning' safety sign for rotating blade hazards.
Identifies and describes the main parts of the rotary tiller.
Procedures for initial use and break-in of the tiller.
A list of checks to perform before operating the tiller.
Guidance on selecting compatible tractors for the tiller.
Instructions for measuring and adjusting the PTO driveline length.
Step-by-step guide for connecting and disconnecting the tiller from a tractor.
Procedures and tips for operating the tiller in the field.
Safety and procedural guidelines for transporting the tiller.
Procedures for safely storing the tiller when not in use.
Specifies required hydraulic oil, gear oil, and grease types.
Instructions for proper greasing of machine components.
Recommended periods for lubrication and maintenance checks.
How to adjust the tiller's offset using the A-frame.
Procedure for replacing worn or damaged tines.
Explanation of slip clutch function and lining replacement.
Procedures for maintaining and checking the slip clutch.
Step-by-step guide for replacing the main shaft assembly.
Common causes and solutions for a non-rotating rotor.
Troubleshooting issues causing untilled soil.
Solutions for a lumpy seed bed condition.
Addressing problems leading to an uneven seed bed.
Instructions for installing the PTO driveline onto the tiller.
Torque values for English standard bolts and capscrews.
Torque values for metric bolts and capscrews.
Comprehensive list of parts for the 50", 60", 72", and 82" tiller models.
Parts list for the PTO slip clutch assembly for 50", 60", and 72" tiller models.
Parts list for the PTO slip clutch assembly specifically for the 82" tiller model.
Parts list for the gearbox assembly for 50", 60", and 72" tiller models.
Parts list for the gearbox assembly specifically for the 82" tiller model.
Lists available optional kits and accessories for the tiller, such as adaptor kits and jacks.
General