Buhler FF-HM-230 - User Manual

Analysentechnik
Installation and Operation Instructions
Original instructions
Moisture detector controllers
Type FF-
BE410002
09/2017
Bühler Technologies GmbH, Harkortstr. 29, D-40880 Ratingen
Tel. +49 (0) 21 02 / 49 89-0, Fax: +49 (0) 21 02 / 49 89-20
E-Mail: analyse@buehler-technologies.com
Internet: www.buehler-technologies.com

Summary

Safety Guidelines for Moisture Detectors

Essential Operator Safety Advice

Guidelines for safe operation, use of original parts, and manual retention.

Understanding Warning Signals and Symbols

Defines signal words (DANGER, WARNING, CAUTION, NOTICE) and explains warning symbols used in the manual.

General Safety Rules and Responsibilities

Outlines general safety rules for installation, operator responsibilities, and maintenance.

Specific Hazard Alerts and Precautions

Details specific dangers: electrical voltage, toxic gases, and explosive atmospheres.

Installation and Electrical Connections

Procedures for Mounting Detectors and Controllers

Instructions for mounting moisture detectors, adapters, and controllers.

Critical Safety for Electrical Connections

Highlights safety precautions for electrical connections, including voltage and installation by trained staff.

Wiring Instructions: FF-19 Controller

Wiring Instructions: FF-HM Controllers

Wiring Instructions: FF-..-U Controllers

Operating the Moisture Detector Controller

Adjusting Sensor Sensitivity Levels

Routine Maintenance Procedures

Replacing Fuses in Controllers

Service, Repair, and Troubleshooting

Solutions for Common Device Malfunctions

Provides a table of common problems, possible causes, and solutions for device malfunctions.

Technical Appendices

Returns and Decontamination Process

Buhler FF-HM-230 Specifications

General

Brand	Buhler
Model	FF-HM-230
Category	Security Sensors
Language	English