EasyManua.ls Logo

BÜHLMANN ZHL-16C GF User Manual

BÜHLMANN ZHL-16C GF
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DIVECOMPUTER.EU
USER
MANUAL
V4.0

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the BÜHLMANN ZHL-16C GF and is the answer not in the manual?

BÜHLMANN ZHL-16C GF Specifications

General IconGeneral
BrandBÜHLMANN
ModelZHL-16C GF
CategoryDiving Instrument
LanguageEnglish

Summary

Introduction to the Dive Computer

Getting the Computer Ready to Work

Bungee Cord Attachment

Instructions on how to install and secure the bungee cord for the device.

Battery Replacement and Powering On

Steps for changing the battery and powering the device on/off.

Dive Computer Operation and Compass Calibration

Basic operation, button functions, and compass calibration procedure.

APNEA Mode

Surface Screens and Configuration

Information and settings displayed on the surface in APNEA mode.

Surface Compass in APNEA Mode

How to use the compass function while on the surface in APNEA mode.

Extended GAUGE Mode

Surface Screens and Functions

Displays and information shown on the computer screen during surface operations.

Detailed Surface Screens and System Settings

Explanation of additional functions, graphs, rescue screen and system settings.

Surface Compass in Extended Gauge Mode

How to use the compass feature on the surface in Extended Gauge mode.

Underwater Screens for Extended Gauge Mode

Information displayed on the screen during underwater operations.

Recreational Mode with Open Circuit - OC REC.

Surface Screens and Configuration

Main surface screen information and configuration options for OC REC mode.

Surface Compass in OC REC Mode

Using the compass feature on the surface while in OC REC mode.

Underwater Screens for OC REC Mode

Information displayed on the screen during underwater operations.

Technical Mode with Open Circuit – OC TECH.

Surface Screens and Configuration

Information displayed on the main surface screen and its configuration options.

Surface Compass in OC TECH Mode

How to use the compass feature on the surface in OC TECH mode.

Underwater Screens for OC TECH Mode

Information displayed on the screen during underwater operations.

Closed Circuit and Fixed PPO2 (Setpoint) Work Mode - CCR FIXED SP.

Surface Screens and Setpoint Configuration

Main surface screen information and PPO2 setpoint configuration for CCR FIXED SP.

Surface Configuration and Compass

Surface configuration options, device info, and compass use for CCR FIXED SP.

Surface Compass in CCR FIXED SP Mode

How to use the compass feature on the surface in CCR FIXED SP mode.

Underwater Screens for CCR FIXED SP Mode

Information displayed on the screen during underwater operations in CCR FIXED SP mode.

Pure Bühlmann Mode

Surface Screens and Configuration

Main surface screen information and configuration options for Pure Bühlmann mode.

Surface Compass in Pure Bühlmann Mode

How to use the compass feature on the surface in Pure Bühlmann mode.

Underwater Screens for Pure Bühlmann Mode

Information displayed on the screen during underwater operations.

Technical Aspects

Pressure Sensor and Underwater Mode Activation

Details on the pressure sensor and how the device enters underwater mode.

Device Operating Time and Battery Replacement

Information on battery life, operating time, and replacement procedures.

Decompression Calculation

Firmware Update

Performing Firmware Update

Step-by-step guide for updating the dive computer's firmware via PC.