1-42
In order to get to a bracket, you’ll have to open the trim cover.
Anchor the top strap to this bracket. Once you have the
top strap anchored, you’ll be ready to secure the child
restraint itself.
Securing a Child Restraint in a Rear
Outside Seat Position
You’ll be using the lap-shoulder belt. See the earlier
part about the top strap if the child restraint has one.
Be sure to follow the instructions that came with the
child restraint. Secure the child in the child restraint
when and as the instructions say.
1. Put the restraint on the seat.
2. Pick up the latch plate, and run the lap and shoulder
portions of the vehicle’s safety belt through or
around the restraint. The child restraint instructions
will show you how.
To Next Page
Loading...
