6-33
Bulb Replacement
For any bulb changing procedure not listed in this
section, contact your dealer’s service department.
For the bulb types to be used in the following
procedures, see “Replacement Bulbs” in the Index.
Halogen Bulbs
CAUTION:
Halogen bulbs have pressurized gas inside and
can burst if you drop or scratch the bulb. You or
others could be injured. Be sure to read and
follow the instructions on the bulb package.
Headlamps
This procedure is for both the driver’s and passenger’s
side headlamps.
1. Remove the two bolts retaining the headlamp assembly.
2. Slide the headlamp outward until the pins are loose.
3. Remove the headlamp assembly to access the bulbs.
To Next Page
Loading...
