Ending Cruise Control
There are two ways to turn
off
the cruise control:
@
Step lightly on the brake pedal, or
move the cruise switch to
OFF.
Erasing Speed Memory
When you turn
off
the cruise control or the ignition, or
shift into PARK (P) or NEUTRAL
(N),
your cruise control
set speed memory is erased.
Exterior
Lamps
The exterior lamps control has three positions:
OFF:
Pushing the control all the way in turns
off
all
lamps and lights.
Parking Lamps:
Pulling the control out, halfway to the
first position, turns on the parking lamps together
with the following:
Taillamps
License Plate Lamps
Sidemarker Lamps
Instrument Panel Lights
Headlamps:
Pulling the control out all the way, to the
second position, turns on the headlamps together
with the previously listed lamps and lights.
A warning chime will sound
if
you open the driver’s door
when you turn the ignition switch to
OFF,
LOCK or
ACCESSORY with the lamps on.
Daytime Running Lamps
/
Automatic
This control, located to the
left of the cluster on the
‘instrument panel, operates
the exterior lamps.
Headlamp System
Daytime Running Lamps
(DRL)
can make it easier for
others to see the front of your vehicle during the
day. DRL can be helpful in many different driving
conditions, but they can be especially helpful in the short
periods after dawn and before sunset.
Fully
functional
daytime running lamps are required on all vehicles
first sold in Canada.
3-1
2
To Next Page