3.
Pick up the latch plate and pull the belt across you.
Don’t let it get twisted.
The shoulder belt may lock
if
you pull the belt
across you very quickly.
If
this happens, let the belt
go
back slightly to unlock it. Then pull the belt
across you more slowly.
4.
Push the latch plate into the buckle until it clicks.
Pull up on the latch plate to make sure it
is
secure. If the belt isn’t
long
enough, see Safety
Belt Extender on page
1-29.
Make sure the release button
on
the buckle is
positioned
so
you would be able to unbuckle the
safety belt quickly
if
you ever had to.
5.
To make the lap part tight, pull down
on
the buckle
end of the belt as
you
pull up
on
the shoulder belt.
1-13
To Next Page
Loading...
