9.
Then
fill
the coolant recovery tank to the COLD
mark on the coolant recovery tank.
leave the radiator pressure cap
off.
10.
Put the cap back on the coolant recovery tank, but
11.
12.
Start the engine and let it run until you can feel the
upper radiator hose getting hot. Watch out for the
engine cooling fans.
By this time, the coolant level inside the radiator
filler neck may be lower. If the level is lower, add
more of the proper DEX-COOL@ coolant mixture
through the filler neck until the level reaches
the base of the filler neck.
5-37
To Next Page