Washing Your Vehicle
Do not bleach
01
ye saj
,
elts.
I
,ou dc
,
t
may severely weaken them.
In
a crash, they
might not be able to provide adequate
protection. Clean safety belts
only
with mild
soap and lukewarm water.
therstrips
Silicone grease on weatherstrips will make them last
longer,
seal
better, and not stick or squeak. Apply
silicone grease with a clean cloth at least every six
months. During very cold, damp weather more frequent
application may be required. See Part
D:
Recommended
Fluids and Lubricants on page
6-
15.
The paint finish on your vehicle provides beauty, depth
of color, gloss retention and durability.
The best way to preserve your vehicle’s finish is to keep
it clean by washing it often with lukewarm or cold
water.
Don’t wash your vehicle in the direct rays
of
the sun.
Use a car washing soap. Don’t use strong soaps
or chemical detergents. Be sure to rinse the vehicle
well, removing all soap residue completely. You can get
GM-approved cleaning products from your dealer.
See GM Vehicle Care/Appearance Materials on
page
5-86.
Don’t use cleaning agents that are petroleum
based, or that contain acid or abrasives. All cleaning
agents should be flushed promptly and not allowed
to dry on the surface, or they could stain.
Dry
the finish
with a soft, clean chamois or an all-cotton towel to
avoid surface scratches and water spotting.
High pressure car washes may cause water to enter
your vehicle.
Cleaning Exterior Lamps/Lenses
Use only lukewarm or cold water, a soft cloth and a car
washing soap to clean exterior lamps and lenses.
Follow instructions under “Washing Your Vehicle.”
5-83
To Next Page
Loading...
