Your vehicle’s key can be used for the ignition as well
as the driver’s door lock, the floor console, and the glove
box. If you need a new key, contact your dealer, who
can obtain the correct key code.
Your vehicle has the PASS-Key
®
III vehicle theft
system. The key has a transponder in the key head that
matches a decoder in the vehicle’s steering column.
If a replacement key or any additional key is needed,
you must purchase this key from your dealer. The
key will have PK3
®
stamped on it. Keep the bar code
tag that came with the original keys. Give this tag to your
dealer if you need a new key made.
Any new PASS-Key
®
III key must be programmed
before it will start your vehicle. See PASS-Key
®
III on
page 2-17 for more information on programming
your new key.
Notice: If you ever lock your keys in your vehicle,
you may have to damage the vehicle to get in.
Be sure you have spare keys.
If you ever do get locked out of your vehicle, see
Roadside Assistance Program on page 7-6 for more
information.
If your vehicle is equipped with the OnStar
®
system with
an active subscription and you lock your keys inside
the vehicle, OnStar
®
may be able to send a command to
unlock your vehicle. See OnStar
®
System on page 2-33
for more information.
2-4
To Next Page
Loading...
Need help?
General
