To recline the seatback, lift up on the recliner
lever located on the outboard side of the seat, then
move the seatback to the desired position.
To raise the seatback, lift up on the recliner lever
without applying pressure to the seatback.
Push and pull on the seatback to make sure it is
locked in place.
Notice: Folding a rear seat with the safety
belts still fastened may cause damage to the
seat or the safety belts. Always unbuckle
the safety belts and return them to their normal
stowed position before folding a rear seat.
To fold the seatback forward, lift up fully on the
recliner lever. Push the seatback forward until
it is flat.
The armrests can be lowered or raised for easier
entry or exit of the vehicle.
17
To Next Page
Loading...
