EasyManuals Logo

Buick 2010 Lucerne User Manual

Buick 2010 Lucerne
472 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #345 background imageLoading...
Page #345 background image
Windshield Washer Fluid
What to Use
When the vehicle needs windshield washer fluid, be
sure to read the manufacturer’s instructions before use.
If the vehicle will be operating in an area where the
temperature may fall below freezing, use a fluid that has
sufficient protection against freezing.
Adding Washer Fluid
Open the cap with the
washer symbol on it. Add
washer fluid until the
tank is full. See Engine
Compartment Overview on
page 6-14 for reservoir
location.
Notice:
When using concentrated washer fluid, follow the
manufacturer’s instructions for adding water.
Do not mix water with ready-to-use washer fluid.
Water can cause the solution to freeze and
damage your washer fluid tank and other parts of
the washer system. Also, water does not clean as
well as washer fluid.
Fill the washer fluid tank only three-quarters full
when it is very cold. This allows for fluid
expansion if freezing occurs, which could
damage the tank if it is completely full.
Do not use engine coolant (antifreeze) in your
windshield washer. It can damage the vehicle’s
windshield washer system and paint.
6-39

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Buick 2010 Lucerne and is the answer not in the manual?

Buick 2010 Lucerne Specifications

General IconGeneral
BrandBuick
Model2010 Lucerne
CategoryAutomobile
LanguageEnglish

Related product manuals