Infotainment System 7-55
To hear all of the numbers
recognized by the system, say
“Verify” at any time.
1. Press and hold
b g for
two seconds.
2. Say “Digit Dial.”
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered,
say “Dial.”
Once connected, the person called
will be heard through the audio
speakers.
Using the “Re‐dial” Command
1. Press and hold
b g for
two seconds.
2. After the tone, say “Re‐dial.”
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
.
Press b g to answer the call.
.
Press c x to ignore a call.
Call Waiting
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
.
Press b g to answer an
incoming call when another call
is active. The original call is
placed on hold.
.
Press b g again to return to the
original call.
.
To ignore the incoming call, no
action is required.
.
Press c x to disconnect the
current call and switch to the call
on hold.
Three‐Way Calling
Three‐way calling must be
supported on the cell phone and
enabled by the wireless service
carrier.
1. While on a call, press
b g.
2. Say “Three‐way call.”
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press
b g to link all callers
together.
Ending a Call
Press c x to end a call.
To Next Page
Loading...
Need help?
General
