Buick 2011 Regal - Page 192

Black plate (34,1)
Buick Regal Owner Manual - 2011
7-34 Infotainment System
Using the Digit Dial Command
1. Press
b g.
.
For vehicles without a
navigation system, the
system responds “Ready,”
followed by a tone.
.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone, say
“Hands Free.” The system
responds “Ready,” followed
by a tone.
2. Say “Digit Dial.” The system
responds “Digit dial using
<phone name>, please say the
first digit to dial,” followed by
a tone.
3. Say the digits to be dialed one at
a time. The system repeats back
the digit it heard followed by
a tone.
4. Continue entering digits until the
number to be dialed is complete.
After the entire number has been
entered, say “Dial.” The system
responds “OK, Dialing” and dials
the number.
.
If an unwanted number is
recognized by the system,
say “Clear” at any time to
clear the last number.
.
To hear all of the numbers
recognized by the system,
say “Verify” at any time.
Using the Call Command
1. Press
b g.
.
For vehicles without a
navigation system, the
system responds “Ready,”
followed by a tone.
.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone, say
“Hands Free.” The system
responds “Ready,” followed
by a tone.
2. Say “Call.” The system responds
“Call using <phone name>.
Please say the name tag,”
followed by a tone.