Getting to Know Your Enclave
6
Seat Adjustments
Power Seat Adjustment
Use the horizontal control (A) on the
outboard side of the seat cushion to
move the seat forward/rearward and —
on the driver’s seat only — up/down,
as well as raise/lower the front or rear
of the seat cushion.
Power Seatback Recline Adjustment
(if equipped)
Use the vertical control (B) on the
outboard side of the seat cushion to
recline/raise the seatback.
Power Lumbar Support Adjustment
(if equipped)
Use the control pad (C) on the outboard
side of the seat cushion to increase/
decrease lumbar support and to
raise/lower the height of the support.
Manual Seatback Recline Adjustment
Lift the lever located on the outboard
side of the seatback and move the seat-
back to the desired position; then
release the lever.
OnStar
®
The OnStar system provides in-vehicle
safety, security and phone services,
available 24 hours a day, 7 days a
week. These services are easily
accessed through the three OnStar
buttons in your vehicle.
OnStar-equipped vehicles also have the
ability to deliver driving directions to you
automatically using OnStar Turn-by-Turn
Navigation. OnStar Advisors can send a
planned route to your vehicle and, as
you approach a turn, the directions play
over your vehicle’s speakers.
For more information about OnStar
features, refer to the OnStar Owner’s
Guide and enclosed audio CD located in
your glove box.
See Section 2 of your Owner Manual.
Child Restraints (LATCH)
Your vehicle is equipped with LATCH
anchors, and may have top tethers for
use with a LATCH compatible child
restraint. The LATCH anchors are locat-
ed in the 2nd-row outboard seating posi-
tions. If your child restraint is not com-
patible with the LATCH system, you may
still use it by installing the child restraint
with the safety belt system. Choose a
child seat that is appropriate for the
child’s age and size (weight and height).
See Section 1 of your Owner Manual.
COMFORT
A
B
C
Enclave 2008 A 1/30/07 3:38 PM Page 6
To Next Page
Loading...
Need help?
General
