In Brief 1-7
Raise or lower the seat by moving
the control (A) up or down.
See Power Seat Adjustment
on
page 3‑3
.
To raise or recline the seatback, tilt
the top of the control (B) forward or
rearward.
See Reclining Seatbacks
on
page 3‑6
.
Press the front or rear of the
control (C) to increase or decrease
lumbar support.
See Lumbar Adjustment
on
page 3‑6
.
Memory Features
On vehicles with the memory
feature, the controls on the driver
door are used to program and recall
memory settings for the driver seat,
outside mirrors, and power tilt
wheel, if the vehicle has this feature.
Storing Memory Positions
To save into memory:
1. Adjust the driver seat and
seatback recliner, both outside
mirrors, and the power tilt wheel,
if equipped.
See Power Mirrors
on
page 2‑17
and Steering Wheel
Adjustment
on page 5‑2
for
more information.
Not all vehicles will have the
ability to save and recall the
mirror positions.
2. Press and hold “1” until
two beeps sound.
3. Repeat for a second driver
position using “2.”
To recall the memory positions,
press and release “1” or “2.”
The vehicle must be in P (Park).
A single beep will sound. The seat,
outside mirrors, and power steering
column, if equipped, will move to the
positions previously stored for the
identified driver.
To Next Page
Loading...
Need help?
General
