Buick Envision 2016 - Bluetooth System

12
IntelliLink Infotainment System
Voice Pass-Thru
Voice Pass-Thru allows access to the voice recognition commands on a compatible cell
phone; i.e. Siri or Voice Command. Visit my.buick.com/learn for more information.
To activate phone voice recognition, press and hold the
Push to Talk button on the
steering wheel for 2 seconds.
Portable Audio Devices
4 USB ports and 4 accessory power outlets
are located in the vehicle to connect por
-
table audio devices. Use the USB ports to
connect and charge mobile devices.
Connect an iPod®, iPhone®, MP3 Player,
or a USB ash drive to a USB port.
Search for music on-screen or by voice
commands.
Press the MEDIA button to select a
portable device as the audio source.
See Infotainment System in your Owner Manual.
Bluetooth® System
Refer to your Owner Manual for important information about using the Bluetooth system
while driving.
Before using a Bluetooth-enabled device in the vehicle, it must be paired with the in-vehi
-
cle Bluetooth system. The pairing process is disabled when the vehicle is moving. Not all
devices will support all functions. Visit my.buick.com/learn for more information.
Pair a Phone
1. To use voice recognition, press the
Push to Talk button on the steering wheel; after
the beep, say “Pair Phone”; or use the touch screen to select the Phone icon > Phones >
Pair Device.
2. Start the pairing process on the phone. Locate your vehicle or Buick IntelliLink on
the phone.
3. Conrm the codes that appear on the touch screen and the phone.
4. When pairing is complete, the phone screen is displayed. Your phone book may be
downloaded depending on the phone.
See Infotainment System in your Owner Manual.