(Cooled Seat): Press
this button to turn the cooled
seat on or off.
Getting to Know Your Lucerne
8
(Heated Seat and
Seatback): Press this button
to turn the heated seat and
seatback on or off.
The memory buttons and heated and cooled seat buttons are located on the driver’s door.
See Section 1 of your Owner Manual.
Memory Settings and Heated and Cooled Seats (if equipped)
Memory Recall: Press button 1 or 2 to
recall the memory settings programmed for
the driver’s seat, the outside mirrors and the
steering wheel. The memory seat setting
also can be programmed to be recalled auto-
matically using the DIC.
To save memory settings:
1. Adjust the driver’s seat, outside mirrors
and steering wheel to a comfortable
position.
2. Press and hold button 1 until two beeps
sound.
3. Repeat these steps using button 2 for a
second driver.
See Section 2 of your Owner Manual.
Easy Exit Seat:
With the vehicle in Park, press this button to
recall the exit position for the driver’s seat
and power tilt/telescoping steering wheel (if
equipped). The easy exit seat setting also
can be programmed to be recalled automati-
cally using the DIC.
Seat Temperature Settings: There are three heated and cooled seat temperature settings
(high, medium and low). Continue to press the button to decrease the temperature setting.
(Heated Seatback):
Press this button to turn the
heated seatback on or off.
To Next Page
Loading...
Need help?
General
