Tire Sidewall Labeling
Useful information about a tire is molded into its
sidewall. The examples below show a typical
passenger vehicle tire and a compact spare tire
sidewall.
Passenger (P‐Metric) Tire Example
(A) Tire Size: The tire size is a combination of
letters and numbers used to define a particular
tire's width, height, aspect ratio, construction type,
and service descripti on. See the “Tire Size”
illustration later in this section for more detail.
(B) TPC Spec (Tire Performanc e Criteria
Specification)
: Original equipment tires designed
to GM's specific tire performance criteria have a
TPC specification code molded onto the sidewall.
GM's TPC specifications meet or exceed all
federal safety guidelines.
(C) DOT (Department of Transportation)
: The
Department of Transportation (DOT) code
indicates that the tire is in compliance with the
U.S. Department of Transportation Motor Vehicle
Safety Standards.
(D) Tire Identification Number (TIN)
: The letters
and numbers following DOT (Department of
Transportation ) code is the Tire Identification
Number (TIN). The TIN shows the manufact urer
and plant code, tire size, and date the tire was
manufactured. The TIN is molded onto both sides
of the tire, although only one side may have the
date of manufacture.
6-58
To Next Page
Loading...
Need help?
General
