Repeat Functionality
To use Repeat:
Press the softkey below
" or ' to select between
Repeat All and Repeat Track.
" (Repeat All): Press the softkey below " to repeat
all tracks. The tab appears lowered when Repeat All is
being used. This is the default mode when a USB
storage device or iPod is first connected.
' (Repeat Track): Press the softkey below ' to
repeat one track. The tab appears raised when Repeat
Track is being used.
Shuffle Functionality
To use Shuffle:
Press the softkey below
>, 2, < or = to
select between Shuffle Off, Shuffle All Songs/Shuffle
Songs, Shuffle Album, or Shuffle Folder.
> (Shuffle Off): Press the softkey below 2 to
turn shuffle off. This is the default mode when a USB
storage device or iPod is first connected.
2 (Shuffle All Songs / Shuffle Songs): Press the
softkey below
= or < to shuffle all songs on the
USB storage device or iPod.
< (Shuffle Album): Press the softkey below > to
shuffle all songs in the current album on an iPod.
= (Shuffle Folder): Press the softkey below > to
shuffle all songs in the current folder on a USB storage
device.
XM Radio Messages
XL (Explicit Language Channels): These channels,
or any others, can be blocked at a customer's
request, by calling 1-800-929-2100 in the U.S. and
1-877-438-9677 in Canada.
XM Updating: The encryption code in the receiver is
being updated, and no action is required. This process
should take no longer than 30 seconds.
No XM Signal: The system is functioning correctly, but
the vehicle is in a location that is blocking the XM™
signal. When the vehicle is moved into an open area,
the signal should return.
Loading XM: The audio system is acquiring and
processing audio and text data. No action is needed.
This message should disappear shortly.
Channel Off Air: This channel is not currently in
service. Tune in to another channel.
Channel Unauth: This channel is blocked or cannot be
received with your XM Subscription package.
4-84
To Next Page
Loading...
