Using the “Digit Store” Command
If an unwanted number is recognized by the system,
say “Clear” at any time to clear the last number.
To hear all of the numbers recognized by the system,
say “Verify” at any time.
1. Press and hold
b g for two seconds.
2. Say “Digit Store.”
3. Say each digit, one at a time, that you want to
store. After each digit is entered, the system
repeats back the digit it heard followed by a tone.
After the last digit has been entered, say “Store,”
and then follow the directions given by the system
to save a name tag for this number.
Using the “Delete” Command
1. Press and hold b g for two seconds.
2. Say “Delete.”
3. Say the name tag you want to delete.
Using the “Delete All Name Tags”
Command
This command deletes all stored name tags in the
Hands Free Calling Directory and the OnStarTurn by
Turn Destinations Directory.
To delete all name tags:
1. Press and hold
b g for two seconds.
2. Say “Delete all name tags.”
Listing Stored Numbers
The list command will list all the stored numbers and
name tags.
Using the “List” Command
1. Press and hold b g for two seconds.
2. Say “Directory.”
3. Say “Hands Free Calling.”
4. Say “List.”
4-90
To Next Page