Buick Rainier 2005 User Manual

Getting to Know Your Rainier
6
Programmable Automatic Power
Door Locks
Your vehicle includes an automatic door
lock/unlock feature with a choice of four
modes, as well as automatic door lock-
out protection to prevent locking the
keys in the vehicle. In the event the
power door lock switch is activated
when a door is open and the key is in
the ignition, the driver door will unlock.
Locking Options: The default setting
for the programmable automatic power
door locks is to lock automatically when
the transmission is shifted into gear
(Mode 1).
Other locking options include:
Mode 2: All doors lock when vehicle
speed is over 8 mph (13 kph)
Unlocking options: Choose one of the
following options before personalizing
your unlocking preference:
Mode 1: Driver door unlocks when the
transmission is placed into Park
Mode 2: All doors unlock when the
transmission is shifted into Park
Mode 3: All doors unlock when the key
is removed from the ignition
Mode 4: No automatic door unlock
Memory Settings for Driver’s
Seat, Mirrors and Pedals
Use the driver’s door mounted controls
(shown above) to program and recall
memory settings for the following
features:
• Driver’s seat, including seatback
recliner and lumbar adjustment
• Accelerator and brake pedals
• Outside rearview mirrors
Programming a Memory Setting
• Adjust the above features to your
preferred settings.
• Press and hold memory 1 or 2 button
located on the driver’s door until two
chimes sound (about three seconds).
This confirms that your settings are
stored.
• To program memory positions for
another driver, repeat the process
using the other memory button.
Recalling Memory Settings
Each time memory button 1 or 2 on the
driver’s door is pressed while the vehicle
is in Park (P), a single chime will sound
and the memory position(s) will be
recalled.
See Section 2 of your Owner Manual.

Buick Rainier 2005 Specifications

General

Brand	Buick
Model	Rainier 2005
Category	Automobile
Language	English