2.
Push the latch plate into the buckle until it clicks.
1.
Pick up the latch plate and pull the belt across you.
Don’t let
it
get twisted.
The shoulder belt may lock if you pull the belt across
you very quickly. If this happens, let the belt
go
back
slightly to unlock it. Then pull the belt across you
more slowly.
If
the belt stops before it reaches the buckle, tilt the latch
plate and keep pulling until you can buckle it.
Pull up on the latch plate
to
make sure it is secure.
If the belt is not long enough, see “Safety Belt Extender”
at the end of ths section. Make sure the release button on
the buckle is positioned
so
you would be able to unbuckle
the safety belt quickly if you ever had to.
1-29
To Next Page
Loading...
