EasyManua.ls Logo

BuildMark 1345BM 1/3HP User Manual

BuildMark 1345BM 1/3HP
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
BuildMark™ Garage Doors
1101 E. River Road
Dixon, Illinois 61021
GARAGE DOOR OPENER
Model 1345BM 1/3HP
For Residential Use Only
Owner’s Manual
Please read this manual and the enclosed safety materials carefully!
Fasten the manual near the garage door after installation.
The door WILL NOT CLOSE unless the Protector System
®
is connected and
properly aligned.
Periodic checks of the opener are required to ensure safe operation.
The model number label is located on the front panel of your opener.
Question and Answer IconNeed help?

Do you have a question about the BuildMark 1345BM 1/3HP and is the answer not in the manual?

BuildMark 1345BM 1/3HP Specifications

General IconGeneral
BrandBuildMark
Model1345BM 1/3HP
CategoryGarage Door Opener
LanguageEnglish

Summary

Introduction

Safety Symbol and Signal Word Review

Explains safety symbols and signal words used in the manual to alert users to potential hazards.

Assembly

Rail and Chain Assembly

Guides on attaching the rail to the motor unit and assembling the chain.

Chain Tension Adjustment

Details how to tighten the chain for proper opener function.

Installation

Mounting and Structural Setup

Covers header bracket location, installation, rail attachment, opener positioning, and hanging.

Wiring, Controls, and Safety Sensors

Covers door control, light, release, electrical, and safety sensor installation.

Door Bracket and Arm Connection

Covers fastening the door bracket and connecting the door arm to the trolley.

Adjustment

Travel Limit Adjustment

Regulates the points at which the door stops during upward and downward movement.

Force Adjustment

Sets the amount of power needed to open and close the door.

Safety System Testing

Verifies the safety reversal system and protector system functionality.

Operation

Using the Opener Controls

Explains how to activate the opener with remote, wall control, and keyless entry.

Manual Door Operation

Provides instructions for disengaging the opener and manually moving the door.

Programming

Remote Control Programming

Guides on pairing remote controls and erasing codes from the opener.

Keyless Entry PIN Management

Instructions for changing or setting up PIN codes for access.

Repair Parts

Rail and Installation Components

Lists parts for the rail assembly and general installation.

Accessories

Optional Accessories

Lists optional items like remotes, keyless entry, and extension brackets.

Warranty

Related product manuals