Changing the fan speed
There are several fan speeds available. You can touch fan speed button
to repeatedly select the fan speed you need (Low (I) , Medium (II), High (III),
Sleep ( ).
• Each time that you touch this button , the fan speed is adjusted from
Low (I) to Medium (II)to High (III) to Sleep( ). The default fan speed is at
the Low (I) speed. The fan speed button indicator light turns blue and
automatically indicates the selected fan speed.
• In sleep mode, the air purifier operates quietly on a very low speed.
Turning on and off
• Put the plug of the air purifier in the wall outlet.
• Touch the Power On/Off button to turn on the air purifier, the Power
On/Off button indicator light turns blue.
• Touch the Power On/Off button again to switch off the air purifier, the
Power On/Off button indicator light turns red.
Getting started
BEFORE OPERATING THE AIR PURIFIER:
1. Carefully take out your air purifier from the box and remove all packaging
materials.
2. Place the unit on a firm, level and flat surface.
3. Before using it for the first time, please open the bottom cover and take out
the filters, remove the wrapping bag of the filters, then insert the filters and
close the cover (See chapter`Replacing the filters`).
4.Plug the power cord into a right voltage AC outlet.
• Make sure the side with the clip is pointing towards outside when
installing filters.
• Wash your hands thoroughly after installing filters.
Using the air purifier
To Next Page
Loading...