WHAT YOU GET
3
The Meal Mixer Express Assembly is used for a variety of functions including ice
crushing, mixing, blending, chopping, mincing, etc. (see components below):
MEAL MIXER EXPRESS ASSEMBLY Components:
4
The Juicer Express Assembly can be used for juicing all types of fruits and
vegetables (see components below):
JUICER EXPRESS ASSEMBLY Components:
Feeder Hole Plug
Chopper/Mixer Blade
(Split-Level)
Meal Mixer Cover
Flat Blade
Meal Mixer Bowl
Blade Remover Meal Mixer Express
Assembly Complete
Juicer Feed
Tube Pusher
Juicer Bowl w/
detachable Spout
Juicer Cover
Juicer Cleaning
Brush
Juicer Filter
Juicer Express Assembly Complete
Juicer Pulp
Container
ASSEMBLING THE BULLET EXPRESS TRIO
MEAL MAKER EXPRESS
ASSEMBLY INSTRUCTIONS
NOTE: To disassemble, just reverse the procedure above.
A. Put the Slicer/Shred-
der Gear Body on the
Motor Body and then
place the Slicer/Shred-
der Bowl on the Slicer/
Shredder Gear Body
shaft.
D. Place your own bowl
or container under the
Slicer/Shredder Cover
outlet.
E. Push the ON button first
and then the “Low” button.
Next, put in your vegetables/
fruits using the Small Food
Pusher.
B. Put the Outlet Disc on the
Slicer/Shredder shaft and
then place the Slicer/Shred-
der disc on the outlet disc in
the desired direction (Slicer
Blade UP for Slicing, DOWN
for Shredding). Use caution
when handling sharp discs.
C. Place the Slicer/
Shredder Cover
over the Bowl and
attach the Safety
Clamps.
2
3
To Next Page
Loading...