Bullet tools CenterFire Shut-n-Cut - User Manual

STEP 1: With your Shut-n-Cut upside down, insert leg into each end until the click.
Turn back over and set on a level surface.
2
2
1
ASSEMBLY
Please Review and Verify Parts Included in Box:
1. SNC Body
2. Leg x 2
3. Knife Kit
3
Quick Start Guide
for Shut-n-Cut #BT51-1927
1
1
2
2
2

Summary

ASSEMBLY

STEP 1: Assemble Legs

Instructions for assembling the Shut-n-Cut by inserting legs into the body until they click.

INSTRUCTIONS FOR USE

Clamp Arm and Insulation Placement

Unlock clamp arm, pivot open, and position insulation on the lower bar for cutting.

Cutting Insulation

Compress product, insert knife, and cut insulation with a sawing motion.

SAFETY PRECAUTIONS

Pinch Point Hazard Warning

Beware of pinch points; do not adjust or collapse the machine with fingers in the way.

Stability and Surface Requirements

Operate only on a level, stable, flat surface to avoid tipping or rocking.

Personal Protective Equipment

Wear safety goggles and other recommended safety gear when cutting.

Bullet tools CenterFire Shut-n-Cut Specifications

General

Brand	Bullet tools
Model	CenterFire Shut-n-Cut
Category	Cutter
Language	English