EasyManua.ls Logo

BullFrog A8 - FROG @ease Cartridge Replacement; Replacing FROG @ease Cartridges

Default Icon
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
Hold weir door/filter plate out
into the hot tub slightly or remove
from hot tub. If cartridge holder is
already installed between the filter
cartridges, remove by pulling up on
the handle.
Then push the top
part of the cartridge
in until it snaps into
place
Snap the FROG @ease Mineral Cartridge into one
opening of the cartridge holder. With the @ease logo
facing the holder, put the dial end of the cartridge into
the holder first by connecting the tab on the holder with
the indent in the cartridge.
4.
3.
Step 2: Set the Cartridges
3. Set the FROG @ease SmartChlor Cartridge to the setting that
matches your hot tub model number. If needed, you may increase or
decrease the dial setting.
Once set, the FROG @ease SmartChlor Cartridge will maintain a low
0.5 to1.0 ppm chlorine level as long as the pH stays within 7.2 and
7.8 so typically there is little need to adjust the cartridge setting.
The FROG @ease System has two replaceable cartridges.
Blue = FROG @ease Mineral Cartridge Silver = FROG @ease SmartChlor Cartridge
Step 3: Put The System To Work
Replace FROG @ease Mineral Cartridge every four months.
Discard it in the trash even though you will hear the spent media
left inside. Don’t attempt to reuse: the minerals are spent after
4 months. Replace FROG @ease SmartChlor
Cartridge when empty based on the FROG
@ease Test Strip showing a lighter color
than the out indicator on the bottle. The
life of the cartridge varies depending on
hot tub size and number of users. FROG
@ease SmartChlor Cartridge will last about
3-4 weeks for an average 400 gallon hot tub.
Drain water from cartridge to ensure it is
empty. Discard in trash or offer for recycling
if available.
Bullfrog Spa Models Setting #
A5L, R5L 1
A6, A6L, R6, R6L, STIL5, X7, X7L 2
M7, A7, A7L, R8L, R7, R7L, STIL7, X8, X8L
3
M9, M8, A9L, A8, A8L, R8
4
Replacing Cartridges
Remove filter snap cap.
Follow the same procedure for the FROG @ease SmartChlor
Cartridge into the other opening.
Replace lter snap cap.
2.
Set the FROG @ease Mineral
Cartridge to #4 using the dial on
the bottom of the cartridge. No fur
-
ther adjustments are necessary for
the life of the cartridge.
1.
Remove the FROG @ease SmartChlor Cartridge from its
bag before proceeding.
2.
1.
5.
6.
7.
Detail of
Cartridge
Holder Tab
FROG
@ease
Mineral
Cartridge
FROG
@ease
SmartChlor
Cartridge
Dial end of cartridge
Holder
Cartridge
top
The combination provides the Fresh Mineral Water benefits of cleaner,
clearer and softer water that’s easier to take care of.
Holder
Cartridge
Holder Tab
With the silver FROG @ease
SmartChlor Cartridge facing
the inside of the hot tub,
insert cartridge holder
between the lter cartridges
under the weir door/lter
plate pushing down until it
stays in place.

Other manuals for BullFrog A8

Related product manuals