Bunker Hill Security 57937 - User Manual

Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 20j
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2020 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
To ols required for assembly and se rv ic e m ay n ot b e i nc lu de d .
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Summary

Functional Description

Specifications

Details sensor/receiver specs, frequency, range, and battery requirements.

Components and Controls

Identifies receiver, sensor, DC jack, and switch for system operation.

Setup Instructions

Installing Batteries

Instructions for installing 9V and C batteries in the Sensor and Receiver units.

Installing the Sensor and Receiver

Guidance on choosing locations and mounting the Sensor and Receiver units.

Operation

Power Switch

Details the three settings (Off, Hi, Low) of the Receiver's power switch.

Low Battery

Describes indicators and procedures for replacing low batteries in the Sensor and Receiver.

Maintenance

Cleaning, Maintenance, and Lubrication

Procedures for inspecting, cleaning, and maintaining the Alert System components.

Parts List

Lists the parts included in the kit, such as Sensor, Receiver, and Hardware.

Bunker Hill Security 57937 Specifications