EasyManua.ls Logo

Bunn CSB3T - Brewing and Leakage Problems

Bunn CSB3T
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
COFFEE ONLY
PARTIALLY BREWED
If the coffee maker has been left ON for an extended time without being used, then
the water tank may need to be topped off. Now that the tank has been relled,
brewing should provide the same volume as normal.
NOTE: There will always slightly less volume of brewed coffee than water poured in
the coffee maker due to water absorbed by the coffee grounds.
BREW TIME IS
TOO SLOW
Sprayhead holes may be clogged. Clean the sprayhead as directed in the CLEANING
THE SPRAYHEAD section of the manual.
The tank and spayhead tube may have lime build-up. Clean the unit as directed in the
ROUTINE CLEANING section of the manual.
If the previous solutions do not work, you may need a deliming tool to remove
excess lime build-up. One can be obtained by completing an online form at
www.bunn.com/home-products/parts-form or by calling 1-800-352-2866 (USA) or
1-800-263-2256 (Canada).
COFFEE MAKER
LEAKS
Call 1-800-352-2866 (USA), 1-800-263-2256 (Canada) or visit
https://retail.bunn.com/support/products.
NEVER DISASSEMBLE THE COFFEEMAKER. THERE ARE NO USER
SERVICEABLE PARTS INSIDE.
TROUBLESHOOTING

Related product manuals