Bunn CWT-CS - Page 5

ITEM PART NO. QTY. DESCRIPTION
5
1 25310.0001 1 Cover, Top
25633.0003 1 Cover, Top (Brewers W/ Top Warmer. Includes items 2, 4 & 25)
01303.0000 1 Screw, Pan Head #4-40 x .50”
00916.0000 1 Fastener, J-Type #4.40
2 12364.0000 4 Decal, Caution - Warmers and Surfaces Are Hot (Two less used on brewers without
top warmer)
3 02722.0000 1 Lid, Pour-In
01319.0000 1 Screw, Thumb #8-32 x .75”
00912.0000 1 Fastener, J-Type #8-32
4 01592.0001 1 Bushing, Snap 1.188” Dia
5 13350.0013 1 Housing, Hood
02308.0000 6 Screw, Pan Head #8-32 x .375”
6 13354.0000 1 Plate, Swivel W/Funnel Rails
7- - - - - - - - 1 Nut (See Tank and Components)
8- - - - - - - - 1 Sprayhead (See Tank and Components)
9 26513.0000 1 Trunk W/Decals (Includes Items 11, 20 thru 22)
10 25144.0004 1 Panel W/Decals (Includes items 11 & 12)
01382.0000 4 Screw, Truss Head SST #6-32 x .375”
00988.0000 4 Fastener, U-Type #6-32
11 00658.0000 2 Decal, Caution - Decanter/Funnel
12 10836.0000 1 Schematic, Electrical 120V & 120V/240V
13 25657.0000 1 Housing W/Decals, Base (Includes items 2 & 14)
02308.0000 16 Screw, Pan Head #8-32 x .38”
14 22306.0000 2 Decal, Decorative Stripe
15 12667.0001 1 Cover, Base
02332.0002 12 Screw, Hex-Crimptite #6 x .38”
16 03359.0001 4 Leg, 4” Adjustable BLK (Order item 26)
17 03993.0000 4 Pad, Anti-Skid, Rubber (.70” Dia.) (Order item 26)
18 01592.0000 2 Bushing, Snap 1” Dia.
19 01593.0000 2 Bushing, Snap 1.5” Dia.
20 00831.0000 1 Decal, Warning - Electrical
21 00656.0000 1 Decal, Comply To Plumbing Code
22 00670.0000 1 Plug, Hole - .437” Hole Dia
23 02999.0000 1 Plug, Hole 1.19” Dia (Early Models)
24 25658.0001 1 Housing W/Decals, Side Warmer (Includes item 2)
25 02765.0000 1 Decal, Caution - Surfaces and Warmers are Hot
26 13255.0005 - Leg Kit (Includes items 16 & 17)
HOOD, TRUNK, PANELS AND BASE W/OUT FAUCET
26492 091302