Bunn VLPF - Initial Setup Procedure; Adjusting Brew Volume

ITEM PART NO. QTY. DESCRIPTION
5
1 07408.0000 1 Cover, Top
01303.0000 2 Screw, PNH Sltd, SST 4-40 x .50"
2 07406.1000 1 Housing , Hood(Includes items 3 thru 5)
01311.0000 9 Screw, Truss Head (SST) 8-32 x .25"
00978.0000 8 Fastener, Flat Type (SST) 8-32
00970.0000 1 Nut, Keps - SST 8-32
3 10178.0000 1 Schematic, Elec 120V VLPF
4 22124.0000 1 Decal, Control Panel
5 00882.0000 1 Decal, Warning Hot Water (FCT)
6 25154.0001 1 Panel W/Decals, Trunk Rear - BLK (Includes items 7 & 8)(Also order Item 17)
01311.0000 5 Screw, Truss Head (SST) 8-32 x .25"
00978.0000 4 Fastener, Flat Type (SST) 8-32
00908.0000 1 Nut, Hex - SST 8-32.
7 00658.0000 1 Decal, Caution - Decanter/Funnel
8 00831.0000 1 Decal, Warning - Electrical
9 01663.0000 2 Bushing, Snap - .875" Dia.
10 01686.0000 1 Bushing, Strain Relief - Nylon
11 04273.1000 1 Housing, Base(Includes item 13)
12 04204.0005 1 Housing, Trunk Front (BLK)
01311.0000 6 Screw, Truss Head (SST) 8-32 x .25"
00978.0000 6 Fastener, Flat Type (SST) 8-32
13 12364.0000 2 Decal, Caution - Warmers are Hot
14 04198.0001 1 Foot, Kit Blk SBR - .75" OD x .48" HT #6 (Set of 4)
15 04203.0000 1 Cover, Base
02332.0002 6 Screw, Hex-Crimptite 6-32 x .38"
16 02776.0000 2 Leg Extensions - 3.5" HT (Optional)
02332.0002 4 Screw, Hex-Crimptite 6-32 x .38"
17 00656.0000 1 Decal, Comply to Plumbing Code
18 32540.0000 1 Decal, Timer Adjustment
HOUSING & COVERS
32262 053100