Bunn VLPF Illustrated Parts Catalog

ITEM PART NO. QTY. DESCRIPTION
7
TANK & COMPONENTS
- 07409.0000 1 Tank Assy, 1320 Watt 120V (Includes items 6-16, 18-21 and 26)
01315.0000 2 Screw, Truss Head (SST) 8-32 x.38"
1 04314.0001 1 Thermostat Kit (Includes items 2 & 3)
20762.0000 2 Screw, Binding Head 8-32 x .25" (Terminal Screws)
2 00720.0000 1 Knob, Thermostat
3 07073.0000 1 Grommet, Thermostat
4 00400.0001 1 Elbow, Male - TNPL .25" FLR x .12MPT
5 00948.0000 1 Fitting Inlet .750-16 x .125" FPT
6 00460.0000 1 Fitting Assy, Tank Inlet (Includes items 4 & 5)
7 01540.0000 1 Washer, SST - .750" ID x 1.0" OD x .01
8 01201.0000 1 Gasket, Tank Inlet -Silicone
9 00942.0000 2 Nut, Hex - Brass .50" -20
10 07412.1000 1 Probe Kit, Liquid Level
01501.0000 1 Washer
20203.0100 1 Lockwasher #8
00908.0000 1 Nut #8-32
11 02536.0000 1 Grommet, Silicone
12 07435.0000 1 Tank Lid Assy, W/intake tube
00908.0000 8 Nut, Hex 8-32
13 04236.1000 1 Tank Heater Kit 1320W 120V (Includes item 14)
14 00943.0000 2 Gasket, Tank Heater
15 29329.1000 1 Thermostat, Limit - 230F - 17A
16 00929.0001 1 Nut/Sleeve
17 07401.0000 1 Fitting, Air Vent
18 07431.0000 1 Tank W/Blanket Warmer 120V (Includes items 18 & 19)
19 07432.0000 1 Tank (12.25" HT W/Fct Ftg)
20 04260.0000 1 Blanket Warmer, 50W 120V
21 04221.0000 1 Gasket, Tank Lid
22 05555.0002 1 Sprayhead Tube Kit (Includes 3 mounting nuts below, items 22 & 23)
00908.0000 3 Nut, Hex 8-32
23 05518.0000 1 Hub, Syphon
24 05515.0000 1 Gasket, Sprayhead Tube
25 01075.0000 1 Nut, Hex .438" - 20
26 01082.0000 1 Sprayhead, 6-Hole
01082.0005 1 Sprayhead, 5-Hole (Optional)
01082.0006 1 Sprayhead, 1-Hole (Optional-Pouch Pack)
Note: The following items are not illustrated
27 21016.0008 1 Lead, Elec - Blk 4" Limit Thermo to Tank Heater
32262 053100

Bunn VLPF Specifications

General

Voltage	120V
Carafe Type	Glass
Material	Stainless Steel
Color	Black
Brewing Capacity	3.8 gallons per hour
Type	Pourover Coffee Brewer