Bunn VPR - Foreword

ITEM PART NO. QTY. DESCRIPTION
7
* Indicates the part number listed is obsolete with no replacement.
1 25154.0000* 1 Panel W/Decals, Trunk Rear - BRN (Includes items 2 & 3)
25154.0001 1 Panel W/Decals, Trunk Rear - BLK (Includes items 2 & 3)
01311.0000 5 Screw, Truss Head #8-32 x .25”
00978.0000 5 Fastener, Flat Type #8-32
01511.0000 1 Lock washer, Ext. Tooth #8
2 00658.0000 1 Decal, Caution - Decanter/Funnel
3 00831.0000 1 Decal, Warning-Electrical
4 01663.0000 1 Bushing, Snap - .875” Dia
5 01686.0000 1 Bushing, Strain Relief - Nylon
6 04273.1000 1 Housing, Base (VPS)(Includes item 12)
04272.0002 1 Housing, Base (VPSA)
7 04204.0000* 1 Housing, Trunk Front (WG)
37454.0000 1 Housing, Trunk Front (BLK)
01311.0000 6 Screw, Truss Head #8-32 x .25”
00978.0000 6 Fastener, Flat Type #8-32
8 04203.0000 1 Cover, Base
02332.0002 6 Screw, Hex-Crimptite #6-32 x .375”
9 03995.0000 4 Foot, Rubber - .75 OD x .44 HT
02332.0002 4 Screw, Hex-Crimptite #6-32 x .38”
- - - - - - - - 4 Foot, Rubber - .75 OD x .44 HT (Order item 13)(Late Models)
01390.0000 4 Screw, Round Head - Phillip #8-32 x .62” For Optional
02324.0000 4 Nut, Acorn - High Crown (SST) #8-32 Leg Extension
10 03992.0000 4 Plug, Foot-Rubber (Early Models)
11 02776.0000 2 Leg, Extensions - 3.5” HT (Optional)
02332.0002 4 Screw, Hex-Crimptite #6-32 x .38”
12 12364.0000 2 Decal, Caution - warmers are hot
13 04198.0001 - Kit, Foot (Includes 4 of item 9)
14 00824.0000 1 Decal, Ground
TRUNKS AND PANELS VPS - VPSA
Early Models
10784 121206