To Next PageTo Next Page
Need help?Do you have a question about the Bunton BZT 2000 EFI Series and is the answer not in the manual?
General| Brand | Bunton |
|---|---|
| Model | BZT 2000 EFI Series |
| Category | Lawn Mower |
| Language | English |
Details on unauthorized modifications and definitions of hazard signal words like DANGER, WARNING, CAUTION.
Lists required tools and details the process for installing the seat on the machine.
Procedure for setting tire pressures and leveling the cutterdeck for optimal cutting performance.
Instructions for installing traction levers and final checks before machine operation.
Schedule of maintenance tasks based on operating hours for engine, hydraulics, and machine systems.
Log for recording performed maintenance tasks on general, engine, and other machine systems.
Daily tasks including interlock system checks, hardware, tire pressure, battery, and indicator lamps.
Guide to points requiring lubrication with grease, including frequency and special notes.
Procedures for checking and changing hydraulic fluid and filter, including important warnings.
Steps for checking and changing engine oil, and inspecting spark plugs for proper operation.
Maintenance for fuel system and engine cooling, including warnings and cleaning procedures.
Procedures for removing, sharpening, balancing, and installing mower blades safely and correctly.
Procedures for replacing the engine-to-cutterdeck and pump-drive belts on the machine.
Instructions for replacing the 61-inch and 72-inch cutterdeck belts.
Detailed specifications for engine, drive system, controls, fuel, and operator systems.
Details on fluid quantities, types, and filter specifications for the mower's systems.
Specifications for cutterdecks including dimensions, construction, drive, and anti-scalp rollers.
Diagram and parts list for the upper engine deck assembly.
Diagram and parts list for the lower engine deck assembly and clutch components.
Diagram and parts list for the 61-inch cradle assembly.
Identification and placement of various safety and informational decals on the machine.
Diagram and parts list for the machine's bumper assembly.
Diagram and parts list for the brake system and rear wheel components.
Diagram and parts list for hydraulic system parts including reservoir, hoses, and pump.
Diagram and parts list for the Hydrogear pump, including overhaul kits and internal parts.
Diagram and parts list for decals specifically applied to the cutterdecks.
Diagram and parts list for the wire harness connected to the Kohler engine.
Diagram and parts list for fuel tanks, fuel lines, and the main control panel assembly.
Diagram and parts list for the electric deck lift system for 72-inch decks.
Diagram and parts list for the oil cooler and the Electronic Control Unit (ECU).
Diagram and parts list for the seat assembly, arm rests, and Roll-Over Protective Structure (ROPS).
Diagram and parts list for the electric deck lift system for 61-inch decks.
Diagram and parts list for steering system components and instrument panel parts.
Diagram and parts list for the cradle and caster wheel assembly.
Diagram and parts list for the 61-inch side discharge cutterdeck.
Diagram and parts list for the various drive belts used on the machine.
Diagram and parts list for the 72-inch side discharge cutterdeck.
Diagram and parts list for the 72-inch cradle assembly.
