ASSEMBLY AND OPERATING INSTRUCTIONS
Dear Customer, please read the following information
carefully before using the appliance for the first time for your
own safety and to ensure correct use.
SAFETY INFORMATION:
-
outlet with earthing contact. Possibly a slow-blow C-fuse
is necessary if you experience problems by switching on to
overloaded fuses.
the rating plate.
Danger to life!
Danger to
life!
damaged. Risk of injury!
the vicinity of the appliance when the appliance is in use.
Fire hazard!
in the vicinity of combustible gases or spray cans)!
Explosion and fire hazard!!
Important! Do not insert any foreign objects into the
appliance openings! Risk of injury (electric shock) and
damage to the appliance!
Attention! Do not look longer time into the light!
Attention! The unit complete becomes very hot when
the appliance is in use! Place the appliance so that it
cannot be touched by accident. Risk of burns!
not place any items of clothing, hand towels or similar
over the heater to dry. Risk of overheating and fire
hazard!
appliance is in use! Risk of burns! Allow the appliance to
cool down before adjusting the bracket
or infirm persons without supervision! Young children
should be supervised to ensure that they do not play with
the appliance!
-outlet must be accessible at all times to
enable the mains plug to be disconnected as quickly as
possible!
must be kept in a safe place. When changing owners, these
instructions must be surrendered to the new owner!
allowed to cool down before being
carried and stored!
LOCATION:
-and ceiling
type operation with permanent connection and must be
installed at least 2,1 m (2000W) above the ground!
horizontally
on a wall.
between the front grille and flammable items (e.g. curtains),
walls and other structures.
n
flammable materials.
directly under a wall socket!
furniture should be placed between the appliance and the
person using the appliance!
ter should never be installed face down
POWER CORD:
appliance parts!
move the appliance by pulling at the cord or use the cord
for carrying purposes!
appliance with the cord coiled!
it over heated hotplates or naked flames!
INSTALLATION:
qualified electrician.
switched off to make sure that the wiring is dead!
Only switch on the appliance when installation is
complete.
SWITCHING ON FOR THE FIRST TIME:
following extended periods on non-use, the appliance may
smell for a short time.
CLEANING:
power supply
system!
wiped dry.
stains could build up from such a contact.
brasive or caustic cleaning agents!
Danger to life!
AFTER-SALES SERVICE:
Therefore, you should contact your specialized dealer or
the customer service.
Important! Any tampering with the appliance will
invalidate the warranty.
may have serious consequences for the user!
TECHNICAL DATA:
TERM2000 BTURCAC200V
Rated voltage: 230 V/50 Hz
Rated output: 2000W
Dimensions (LxWxD): 71x9,5x12,5cm
Weight about: 2,5 kg
Protective system: IP67
To Next Page
Loading...