Burley Cub X - Child Securing and Comfort; Adjusting Independent Seat Recline; Securing Your Child Safely

OWNER’S INSTRUCTION & SAFETY MANUAL
9
BURLEY.COM ENG
Adjusting the Independent Recline
1. To adjust the independent recline, squeeze the
yellow button on the bottom of the seat support,
slide to the desired setting and release the yellow
button (Figure 23).
2. When locking in place, align the marks on the seat
with one of the 3 recline positions on the frame
(Figure 24).
3. Pull firmly to ensure the seat is locked in place.
Note: Do not allow child play with the yellow recline
button or recline track.
Figure 23
Figure 24
Figure 25
Figure 26
Securing Your Child
1. Before loading or unloading your children, set the parking
brake. After loading, secure and adjust the harnesses. Snap
shoulder straps & waist straps into 5-point harness buckle
and adjust straps so they are secure (Figure 25). Fasten and
adjust lap belt(s) to fit securely.
2. To remove your children, simply press the yellow release
button on the 5-point harness (Figure 25a).
3. When using double trailer with one child, always seat the child in
the right side position (Figure 26).
WARNING
Avoid serious injury from falling or sliding out.
Always use 5-point harness.
A