3
Burley Nomad Owner’s Instruction and Safety Manual
I. Hardware Bag Contents and Tool List
IMPORTANT: Please verify that you have received all of the con tents listed. Do not
pro ceed with as sem bly if any parts are missing; contact Bur ley im me di ate ly for
replacement parts.
Hardware Bag Contents
Rear refl ectors:
(2) Refl ector bracket
(2) Self-tapping Phillips screw, bracket
(2) Rear refl ector, red
(2) Self-tapping slotted screw, refl ector
Roll-bar hardware:
(2) Roll-bar knob
Envelope:
Burley Checklist
Warranty Card
Burley Nomad Owner’s Instruction & Safety Manual
NOTE: Alloy spoked wheels come with refl ectors already in stalled.
II. Attaching the Wheels
First, verify that the tires are infl ated to 30-35 P.S.I. Next, tip the trailer frame on its
back end. If you are work ing on a rough or dirty sur face, lay down a cloth or other
protective barrier to avoid damage to your trailer. With the quick-release lever in the
"OPEN" position, insert the wheel axle assembly com plete ly into the hollow trailer
axle, making sure that the hor i zon tal shaft goes all the way into the axle.
NOTE: The spoked wheels in stall with the inset side of the hub facing
outward.
Tools Required:
Phillips screwdriver
Flat blade screwdriver
Quick-release lever
in unlocked “OPEN”
position
Quick-release lever
in locked “CLOSED”
position
To Next Page
Loading...
