THE FUNCTION INDICATORS
POWER LED The POWER LED (16) lights up orange, if the CD player is in standby mode and lights up
red, when the unit is turned on.
AUDIO LED The AUDIO LED (11) illuminates, when the internal sample rate of the D/A converter is
switched to 192kHz.
PROGRAM LED The PROGRAM LED (9) illuminates, when the PROGRAM function has been activated.
(see chapter “ HOW TO PROGRAM A FAVORITE TRACK SELECTION”)
SYNC LED The SYNC LED (2) indicates a correct data stream input.
The SYNC LED remains dark, when a selected external input RCA1, RCA2, TORX, MMI
receives an invalid data stream.
When, for example, a DTS encoded CD is inserted into the CD drive, the music signal is
only played back at the digital outputs. In this case, the SYNC LED remains dark too.
INPUT LEDs The INPUT LEDs (1) indicates the selected external digital input or the internal CD drive.
Alphanumeric display The alphanumeric display shows the current track of the CD in the TRACK display (4) and
the playing time in the TIME display (5).
The TIME display can be switched to
- lapsed time of the current track
- lapsed time of the CD
- remaining time of the CD
by pushing the MODE button on the remote control.
To Next Page
Loading...
Need help?
General
