DESCRIPTION OF THE MENU ITEMS OF THE SYSTEM SETUP
AUTO You can choose, if the CD player should start playback directly after switching on the unit.
OFF The unit reads only the table of content and remains in STOP mode.
ON The unit begins playing the CD directly after switching on.
SNR You can choose, if the type and the serial number of the unit will be shown in the
alphanumeric display after switching on the player.
OFF The type and the serial number will not be shown.
ON The type and the serial number will be shown after switching on.
RC-I If you want to change the inputs of the CD player with the keys STATION +/- of the remote
control, you should set this item to YES. Is this item set to NO, you can change the inputs
with the INPUT buttons on the front of the unit only.
NO Change of inputs with the remote control is not possible..
YES Change of inputs can also be done with the remote control.
DEFAULTS If you want to set all menu items to default, incl. the display brightness, you should press
the key OK of the remote control after selecting this menu item. The alphanumeric display
will show CHANGED to confirm the setting.
To Next Page
Loading...
Need help?
General
