BURREL S22 - Recipient and SMS Control Setup; Network Parameter Management

9
Phone
Input or revise the recipient Phone number.
Email
Input or revise the recipient Email address.
Image From
The text content of Image From will be
included in MMS/Email subject
Wireless
(wireless
camera only)
SMS
Control
Turning the SMS command function always
on or every n hours. On mode will increase
the power consumption.
Copy Para
Copy the current network parameter
settings to the TF card.
Update Para
If no pre-programmed carrier’s network
parameters, you will need to use the Setup
Tool to program in manually. After you use
the Setup Tool, a MMSCFG.bin file will be
generated and put on the TF card. You will
need to run Update Para to write the
settings to the camera.
Image Quality
Choose the wireless picture quality.
Debug Switch
Generate logs automatically when to set to
on. Press save to manually create logs.
Playback Button (Viewing Photo or Video)
• Switch to ON position
• Press Playback button to view the latest picture (or video).
• Press OK button to start playing the video clips.
• Press OK button to pause and press playback to quit playing.
• Press ◄ button to view the previous image and press ► button
for the next.