BURREL S22 - Advanced System Management; Wireless Configuration; Send Mode and Transmission Options

8
Camera
Tracker
Enable of disable camera tracker.
Password
This option allows a 6 digits password to be
set, keep it in mind. Recommend to use.
Time Stamp
ON /Off. Choose if the image stamp is to be
shown or not.
Overwrite
Cycle writing the TF card.
Beep
Enable or disable key tone
LED indicator
Enable or disable blinking of indicator.
FW Update
Start to update FW and MCU once update
files copied to TF card root directory.
System
Format
Format the TF card. This will erase all data
on the TF card. This cannot be undone.
Default
Restore all settings to factory default
values.
Language
Choose the menu language.
Information
Show Model Number, HW/FW/MCU version
and IMEI(wireless camera only).
Wireless
(wireless
camera only)
Send Mode
Choose to send the photo or video clips
instantly, or Daily report (send one picture
at preset time, save others) or turn off
sending. Both= Instant and Daily report.
Send Via
Choose to send the image via MMS (MMS
plan) or Internet (Data plan).
Send To
Send the images to Phone, Email or Both.