BURREL S22 - Image Size and Camera Mode Commands; PIR Sensitivity and TF Card Commands; System Time and Network Commands; SMTP and Status Response Commands

17
Choose the wireless
image size
*190#
*190#0# // choose 640*480
*190#1# // choose 1280*960
*190#2# // choose original photo
Camera Mode Photo
*200#0#
Set to photo mode
Camera Mode Video
*200#1#
Set to video mode
Photo+Video mode
*200#2#
Set to Photo+Video mode
Set PIR Level to High
*202#0#
PIR sensitivity high
Set PIR Level to
Normal
*202#1#
PIR sensitivity normal
Set PIR Level to Low
*202#2#
PIR sensitivity low
Set PIR Level to Off
*202#3#
PIR sensitivity off
Format TF card
*204#
TF card was formatted
Set system time
*205#YYYYMMDDHHMMSS#
Set workday
*206#??????? #
?= “0” or “1”, from
Mon. to Sun.
*206#1001001# means PIR enabled on
Monday, Thursday and Sunday,
disabled on other days.
Check network Para
*207#
Show current network settings
Set SMTP Para
*208#option#
*208#account#password#server
#port#ssl type#(ssl=1, no ssl=0)
Disable status
response
*209#0#
No SMS alert info after SMS
command executed