camera should vary with the object size appropriately. In general, 3-6
feet is preferred.
16. If camera is working (Switch=on), it goes to setup mode when press
any button.
17. Push the power switch to the OFF position to power off the camera.
Please note that even in the OFF mode, the camera still consumes a
small amount of battery power. Therefore, please remove the batteries
if the camera is not in use for an extended time.
Menu Settings
Switch the camera to SETUP mode & press MENU. Press ▲▼◄► to
select the desired value, And then press OK to save.
Choose to take Photo / Video/Photo&Video
Choose the image size, e.g. 3MP, 5MP,
8MP, 10MP ,12MP or 24MP.
Choose the number of images taken after
each trigger (1-10).
Choose the interval time length between the
images taken in burst mode (Short 1/2/3s).
Choose the video resolution.
Set the video length to the desired duration.
Enable or disable video sound recording.
Select between High,Normal,Low,and OFF.
To Next Page
Loading...
