How to fix a BUSCH COBRA NC 0630 C that runs very noisily?
If your BUSCH Water Pump is running very noisily, it could be due to the wrong oil quantity or an unsuitable oil type; use one of the recommended oils in the correct quantity. Alternatively, there may be defective gears, bearings, or a coupling element, requiring machine repair (contact Busch).
General| Brand | BUSCH |
|---|---|
| Model | COBRA NC 0630 C |
| Category | Water Pump |
| Language | English |
Explains the meaning of DANGER, WARNING, CAUTION, NOTICE, and NOTE keywords used in the manual.
Illustrates the components and connections for the NC 0600 C and NC 0630 C models.
Explains the twin-screw pump working principle and its intended use for dry gases and ATEX environments.
Covers safe lifting, handling, and transport precautions for the machine, including warnings.
Covers ATEX environment compliance, ambient conditions, ventilation, and placement requirements.
Instructions for connecting suction and discharge lines, including material and size considerations.
Instructions on connecting the earth connection to prevent electrostatic charge.
Illustrates the steps for filling the machine with oil on both motor and suction sides.
Illustrates the process of filling the machine with cooling liquid.
General warnings and requirements for electrical installation by qualified personnel.
Covers pre-operation checks, oil filling, and general safety warnings before commissioning.
To Next Page
