EasyManua.ls Logo

Bush Hog 2515 - User Manual

Bush Hog 2515
1 page
Print Icon
Loading...
















SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 32
 
 15 ft

2 inch Diameter
 2 to 14 inches
 (from Clevis to Wheel Hub at Transport Height) 15 ft 6 inches x 14 ft 1 inch
(from wing skid to wing skid)
7 ft 2 inches

540 RPM/1000 RPM

50 PTO

10 gauge

1/4
x 9 inches

Transfer - 160, Center - 110, Wings - 110
 ASAE Cat. 5 (540 RPM), ASAE Cat. 4 (1000 RPM)

ASAE Cat. 4
 (3) 2 Friction Plate Clutches
 15,268 FPM

1/2 x 4 inch Uplift with 6 inch Overlap

Self Leveling Pull Type with Swivel Clevis
 (Operating) 87° Up to 22° Down

Choice of Laminated Tire, Used Aircraft Tire, Foam-filled Used Aircraft Tire, or Pneumatic 15 inch Wheel
 Greaseable pivot points with bushings
 Independent springs on the deck
 Front and Rear Belting or Chains, See Model
 Chain Shielding, Valve & Stand Kit
 1 year limited warranty with a 5 year gearbox limited warranty
 • Quick detach gearbox shields
 Driveline safety retaining rings
Question and Answer IconNeed help?

Do you have a question about the Bush Hog 2515 and is the answer not in the manual?

Bush Hog 2515 Specifications

General IconGeneral
TypeRotary Cutter
Cutting Width15 ft
Number of Gearboxes3
Minimum Tractor HP50 HP
Required PTO HP50 HP

Related product manuals