Specifications Based on 1997 ASAE STANDARDS
40 - 70
2WD/FWA
- Measured at Pivot Pin 126 inches
- Under Level Bucket 116 inches
45°
3.5 inches
to Maximum Height - At Pivot Pin 3500 lbs
to Maximum Height - 31.5 inches Forward of Pivot Pin 2200 lbs
to 59 inch Height - At Pivot Pin 4100 lbs
to 59 inch Height - 31.5 inches Forward of Pivot Pin 2950 lbs
- At Pivot Pin 5000 lbs
- 31.5 inches
- Forward of Pivot Pin 3500 lbs
at Maximum Height - 31.5 inches
Forward of Pivot Pin 5100 lbs
at 59 inch Height - 31.5 inches
Forward of Pivot Pin 5300 lbs
at Ground Level - 31.5 inches
Forward of Pivot Pin 3600 lbs
(Ground Level to Full Height) 5 seconds
(Full Height to Ground Level) 3 seconds
(Full Rollback to Full Dump) 5 seconds
(Full Dump to Full Rollback) 3 seconds
Two 2.5 inch Bore, 23.38 inch Stroke Double Acting Bucket Cylinders and Two 2.75 inch Bore, 18.25 inch Stroke Double Acting Lift Cylinders
2850 PSI hyd. pressure & 11 GPM pump capacity
Available in 72, 80 and 84 inch widths
Available in 60, 72 and 84 inch widths
Forklift Attachment (48 inch tines), Round Bale Spear, Dual-Probe Bale Spear, Grapple Fork, Bucket Tine Teeth,
Bolt-On Digging Teeth, Side Cutting Edges, Spill Guard Attachment, Hydraulic Self-Leveling, and Grill Guards
1 year limited warranty
“Universal” skid steer quick attach system compatible with skid steer syle attachments,
Available in major tractor colors
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 69
Need help?
General
